D-Sub & Micro D Connectors

Amphenol CDI D-Sub & Micro-D filter connectors meet all the requirements of MIL-PRF-24308 and MIL-PRF-83513 while providing filtering in accordance with the attenuation curves noted herein. MIL-PRF-24308 connectors (Standard density and Hi-density) and MIL-PRF-83513 are manufactured in all layouts offering maximum contact density in a minimum of space.

Both series of connectors are offered with the standard variations in mounting hardware, standard straight or right angle contacts and PCB, solder cup, and crimp termination.

Grid List

Filters

24308 J4 Pi Filter Connector Plug 37D Pin Solder Cup

SKU: J085PS4N37APA

24308 PLUG 37D PIN/S.C., J4 PL FILTER

24308 104 Pi Filter Connector (Receptacle), Stainless Steel Crimp 104 Stainless Steel

SKU: J085RC6P104BS

24308 RCPT, CRIMP, SS, 104, PM-FILTER

Performance Benefits / Certification

Planar design
Machined shells
Ferrite immobilization
Space qualified
Can incorporate filtering plus Transient Voltage Suppression
Can meet DO-160 lightning requirements

Design Considerations

Rectangular	Mating End Contacts	Filter Types*	Electrical	Environmental	Mounting Hardware	Contact Terminations
MIL-DTL-24308	Pin	C	Feed Thru Contacts	Thermal Cycle	Clinch Nut	PC Tails
MIL-DTL-83513	Socket	Pi	Ground Contacts	Thermal Shock	Helicoil	Solder Cup
		C-L/L-C	Capacitance	Burn-in	Jack Posts	Crimp
		T	Attenuation	Immersion		Wire Wrap

* Maximum or Mixed Capacitance Requirement? Available upon request

Mechanical & Environmental Performance

Test Description	Procedure
Temperature Cycling	EIA-364-32 Condition I
Durability	500 Matings at a rate of 200 ± 100 cycles per hour
Shock	EIA-364-27, 3 Axis
Vibration	EIA-364-28 Condition IV
Fluid Immersion	EIA-364-10 Test Fluids (a) and (d)
Salt Spray	EIA-364-26 Condition B
Humidity	EIA-364-31 Method IV